€130.00
Available, delivery time: 1-3 days
Product information "Z1 Polyurethane Differential Bushing Kit"
Z1 Polyurethane Differential Bushing Kit – Nissan 350Z & 370Z
Replace Worn Factory Differential Bushings
The Z1 Motorsports Polyurethane Differential Bushing Kit replaces all three factory differential mounting bushings on the Nissan 350Z (Z33) and Nissan 370Z (Z34).
The original rear differential bushing is a known weak point on both models. Over time, the factory rubber bushing can deteriorate, crack or leak its silicone-based fluid.
A common sign of failure is a dark, oily residue running down the rear subframe beneath the differential mounting point.
Once the bushing has failed, the differential can move excessively under acceleration, deceleration and gear changes.
The Z1 polyurethane bushing kit provides a firmer mounting solution while retaining more vibration isolation than solid metal bushings.
Why Replace All Three Differential Bushings?
The rear differential is supported by three mounting bushings: two at the front and one at the rear.
Although the large rear bushing is generally more prone to failure, the two smaller front bushings also age and can become worn.
If the rear bushing has been defective for an extended period, the remaining mounts may have been subjected to additional movement and stress.
Replacing all three bushings provides a consistent mounting arrangement across the complete differential assembly.
The Z1 kit includes the required polyurethane bushings and matching inner sleeves.
Reduced Differential Movement
The factory rubber bushings are designed to isolate noise and vibration from the passenger compartment.
The Z1 polyurethane bushings provide a firmer connection between the differential and rear subframe.
Potential benefits include:
Reduced differential movement under load
More consistent drivetrain response
Less movement during acceleration and gear changes
Replacement of worn or leaking factory bushings
Improved differential support on modified vehicles
More vibration isolation than solid aluminium mounts
The difference will depend on the condition of the original bushings and the vehicle's overall drivetrain setup.
Suitable for Road and Performance Applications
The Z1 polyurethane differential bushings are suitable for Nissan 350Z and 370Z owners who want to replace worn factory mounts or reduce unwanted drivetrain movement.
They are particularly relevant for vehicles with increased engine torque, upgraded clutches or frequent track use.
Unlike solid metal differential bushings, polyurethane retains some elasticity and vibration isolation.
However, because the mounts are stiffer than the original rubber components, additional drivetrain noise and vibration may be noticeable inside the vehicle.
Vehicle Compatibility
Nissan 350Z (Z33)
Nissan 370Z (Z34)
Technical Details
Manufacturer: Z1 Motorsports
Product: Polyurethane Differential Bushing Kit
Mounting position: Rear differential
Material: High-temperature-resistant polyurethane
Replaces all three factory differential mounting bushings
Firmer differential support than standard rubber bushings
Includes matching inner sleeves
Suitable for repair and performance applications
Package Contents
1 × rear polyurethane differential bushing
2 × front polyurethane differential bushings
Matching inner sleeves
The kit covers all three differential mounting points.
Installation Information
The original rear differential bushing is installed in the rear subframe and must be removed before the polyurethane replacement can be fitted.
Depending on the condition of the original components, removal may require specialist extraction tools.
The two front differential bushings must also be replaced to install the complete kit.
We recommend professional installation by a workshop familiar with Nissan 350Z and 370Z rear axle assemblies.
CTD Germany can carry out the replacement at our workshop in Wesel, Germany.
Frequently Asked Questions
How can I tell if the original differential bushing has failed?
A common sign is dark fluid leaking from the large rear differential bushing and leaving visible marks on the rear subframe. Excessive differential movement or noticeable drivetrain clunks may also indicate worn mounts, although these symptoms can have other causes.
Why should I replace all three bushings?
Replacing all three provides consistent support across the differential mounting points and avoids combining new, firmer polyurethane bushings with potentially worn factory rubber mounts.
Will the bushings reduce drivetrain movement?
Yes. Polyurethane is firmer than the factory rubber mounting material and is designed to limit differential movement under load.
Will I notice more noise or vibration?
Possibly. Stiffer differential mounts can transmit additional drivetrain noise and vibration into the vehicle. The effect depends on the vehicle and the condition of its other mounts.
Are polyurethane bushings suitable for everyday driving?
They can be used on road vehicles, but drivers should expect a firmer drivetrain connection and potentially more noise and vibration than with standard rubber bushings.
Are these solid differential mounts?
No. The kit uses polyurethane bushings rather than rigid metal mounts.
Can CTD Germany install the kit?
Yes. We offer differential bushing replacement and related rear axle work at our workshop in Wesel, Germany.
Related Products and Services
Wavetrac Limited Slip Differential
Differential carrier bearings and seals
Rear subframe bushings
Reinforced drivetrain mounts
Rear axle repairs and restoration
Differential installation at CTD Germany
Login
Angaben zur Produktsicherheit gem. Verordnung (EU) 2023/988
2877 Carrollton-Villa Rica Hwy
Carrollton, GA 30116
USA
Tel.: +1 770-838-7777
E-Mail: info@z1motorsports.com Verantwortliche Person: CTD Germany e.K.
Weseler Str. 97
46487 Wesel
Germany
E-Mail: info@ctd-germany.com