€860.00
Available, delivery time: 1-3 days
Product information "Z1 CSC Elimination Kit V2"
Z1 CSC Elimination Kit V2 – Nissan 350Z HR & 370Z
Replace the Factory Internal Clutch Slave Cylinder with an External System
The factory concentric slave cylinder (CSC) is a known weak point of the manual transmissions fitted to the Nissan 350Z VQ35HR and Nissan 370Z VQ37VHR.
Unlike a conventional external clutch slave cylinder, the factory CSC is located inside the transmission bellhousing. If it fails, the transmission must be removed to access and replace it.
The Z1 Motorsports CSC Elimination Kit V2 replaces the original internal slave cylinder with an external clutch slave cylinder, clutch fork and conventional release bearing.
At CTD Germany, we prefer this conversion over simply installing a reinforced internal CSC when customers are looking for a long-term alternative to the original design.
External Clutch Slave Cylinder Conversion
The Z1 V2 kit eliminates the original concentric slave cylinder and replaces it with a conventional clutch release mechanism.
The external slave cylinder operates a forged chromoly clutch fork, which transfers movement to the clutch release bearing.
This design offers a significant serviceability advantage: the external slave cylinder can be accessed and replaced without removing the transmission.
The transmission still needs to be removed for servicing the clutch fork, release bearing or other internal clutch components.
Designed for Standard and Performance Clutches
The Z1 CSC Elimination Kit V2 is suitable for a range of applications, including:
Standard road cars
Vehicles with upgraded performance clutches
Supercharged and turbocharged vehicles
Trackday cars
Motorsport applications
The system is designed to accommodate clutch stack heights between 82 and 89 mm.
Correct clutch geometry is essential. The clutch stack height must be measured during installation, and the appropriate pivot ball spacer must be selected.
Z1 Billet Transmission Front Cover
The kit includes a Z1 billet transmission front cover designed for the external clutch release conversion.
Together with the chromoly clutch fork and pivot ball, it provides the mounting arrangement required to replace the original internal CSC system.
The kit also includes a genuine Nissan release bearing and input shaft seal.
No Periodic Adjustment for Clutch Wear
Unlike some external CSC conversion systems, the Z1 V2 design does not require regular manual adjustment as the clutch wears.
However, correct initial installation and clutch geometry remain essential for proper operation.
Technical Specifications
Manufacturer: Z1 Motorsports
Product: CSC Elimination Kit V2
Converts the factory internal CSC to an external slave cylinder
Z1 billet transmission front cover
Forged chromoly clutch fork
Chromoly pivot ball
Stainless steel slave cylinder bracket
Heat protection for the external slave cylinder
Genuine Nissan clutch release bearing
Genuine Nissan transmission input shaft seal
Two pivot ball spacers
Compatible clutch stack height: 82–89 mm
No periodic adjustment required for normal clutch wear
Vehicle Compatibility
Suitable for manual transmission models:
Nissan 350Z (Z33) with VQ35HR engine
Nissan 370Z (Z34) with VQ37VHR engine
The kit is not intended for the earlier Nissan 350Z VQ35DE or VQ35DE RevUp clutch systems.
CTD Germany has installed and tested the Z1 V2 CSC Elimination Kit on both VQ35HR and VQ37VHR applications.
Installation Information
Installation requires removal of the manual transmission.
Before final assembly, the clutch stack height must be checked and the correct pivot ball spacer selected to achieve the required release geometry.
Incorrect installation can cause clutch disengagement problems, abnormal release bearing loading or premature component wear.
We recommend installation by a workshop experienced with Nissan VQ35HR and VQ37VHR manual transmissions.
CTD Germany can carry out the complete conversion at our workshop in Wesel, Germany. Combining the installation with a scheduled clutch replacement is particularly practical because the transmission must already be removed.
Frequently Asked Questions
What is the advantage of an external clutch slave cylinder?
The main advantage is serviceability. If the external slave cylinder fails, it can be replaced without removing the transmission.
Does the kit completely eliminate the original CSC?
Yes. The factory internal concentric slave cylinder is removed and replaced with an external slave cylinder, clutch fork and conventional release bearing arrangement.
Does the kit fit the Nissan 350Z VQ35DE?
No. This version is intended for the later VQ35HR engine with the corresponding manual transmission.
Does the kit work with aftermarket performance clutches?
It supports compatible clutch systems with a stack height between 82 and 89 mm. The actual clutch dimensions must be checked before installation.
Does the system require regular adjustment?
No periodic adjustment for normal clutch wear is required. Correct initial installation and setup are still necessary.
Can I install the kit without removing the transmission?
No. The transmission must be removed to replace the original internal CSC arrangement and install the conversion components.
Can CTD Germany install the kit?
Yes. We offer professional installation at our workshop in Wesel and can combine the conversion with a clutch replacement.
Related Products and Services
Performance clutch kits for Nissan 350Z HR and 370Z
Genuine Nissan clutch components
Manual transmission service parts
Clutch replacement at CTD Germany
Transmission maintenance and repair
Login
Angaben zur Produktsicherheit gem. Verordnung (EU) 2023/988
2877 Carrollton-Villa Rica Hwy
Carrollton, GA 30116
USA
Tel.: +1 770-838-7777
E-Mail: info@z1motorsports.com Verantwortliche Person: CTD Germany e.K.
Weseler Str. 97
46487 Wesel
Germany
E-Mail: info@ctd-germany.com