Skip to main content Skip to search Skip to main navigation
Mo-Fr 9AM - 6PM

STILLEN Gen 3 Ultra Long Tube Cold Air Intake

Product information "STILLEN Gen 3 Ultra Long Tube Cold Air Intake"

STILLEN Gen 3 Ultra Long Tube Cold Air Intake – Nissan 370Z

Dual Cold Air Intake System for the VQ37VHR Engine

The STILLEN Generation 3 Ultra Long Tube Cold Air Intake is a performance intake system developed for the Nissan 370Z with the 3.7-litre VQ37VHR engine.

Unlike short ram intake systems that draw air from the engine compartment, the STILLEN Gen 3 uses two extended aluminium intake pipes to position the air filters in front of the radiator, behind the front bumper.

This location allows the filters to draw air from the front of the vehicle rather than from the warmer engine bay.

The system is designed to improve airflow, reduce intake restrictions and support engine performance at higher loads.

Ultra Long Tube Design

The Gen 3 system uses mandrel-bent aluminium intake pipes with carefully designed changes in tube diameter.

The intake pipes run from the throttle bodies through the front radiator support to the two air filters positioned ahead of the radiator.

This layout reduces the number of bends in the intake path while allowing the filters to access cooler incoming air.

Key features include:

  • Dual intake system for the VQ37VHR engine

  • Extended aluminium intake pipes

  • Air filters positioned ahead of the radiator

  • Smooth mandrel-bent tubing

  • Designed intake tube transitions

  • Reusable performance air filters

  • Vehicle-specific installation hardware

Performance Gains – Manufacturer Test Results

STILLEN developed the Gen 3 intake through extensive testing of different intake pipe configurations.

According to STILLEN, testing on a Nissan 370Z showed an increase of up to 17.5 horsepower at the wheels and 13 lb-ft of wheel torque with the factory ECU calibration.

These figures are manufacturer test results and should not be interpreted as guaranteed gains for every vehicle.

Actual results depend on the engine's condition, ambient temperature, other modifications and ECU calibration.

For vehicles equipped with additional intake or exhaust upgrades, individual ECU tuning may help optimise the overall engine setup.

Reusable Performance Air Filters

The system includes two reusable performance air filters.

The filters are positioned behind the front bumper, ahead of the radiator, where they can receive incoming air through the front grille.

The supplied oiled filter elements can be cleaned and serviced according to the filter manufacturer's instructions.

Regular inspection and maintenance are particularly important because the filters are mounted in the front of the vehicle and may be exposed to moisture and road debris.

Installation Requires Modifications to the Radiator Support

Installing the STILLEN Gen 3 intake requires removal of the original air filter housings and intake pipes.

The new aluminium pipes pass through the front radiator support. The existing openings must be slightly enlarged to provide sufficient clearance.

STILLEN recommends removing the front bumper during installation to improve access.

The original mass airflow sensors are transferred to the new intake pipes.

After installation, all connections must be checked for correct seating, and the intake pipes must have sufficient clearance from surrounding components.

Professional installation is recommended.

Nissan 370Z Nismo Compatibility

According to STILLEN, the Gen 3 intake can also be fitted to Nissan 370Z Nismo models, but additional modifications may be required.

Fitment should therefore be checked before ordering, particularly on vehicles with modified front-end components.

Vehicle Compatibility

  • Nissan 370Z (Z34), 2009–2020

  • Nissan 370Z Nismo (Z34), with additional installation modifications where required

  • Engine: 3.7-litre VQ37VHR

Technical Specifications

  • Manufacturer: STILLEN

  • Product: Generation 3 Ultra Long Tube Cold Air Intake

  • Manufacturer part number: 402852 (oiled filter version)

  • Intake configuration: Dual cold air intake

  • Intake pipes: Mandrel-bent aluminium

  • Air filter position: Ahead of the radiator

  • Filter type: Reusable oiled performance filters

  • Compatible engine: Nissan VQ37VHR

  • Original mass airflow sensors retained

  • Modification of the radiator support openings required

  • ECU tuning not mandatory according to STILLEN for standard applications

Package Contents

  • 2 × reusable performance air filters

  • 2 × upper intake pipes

  • 2 × lower intake pipes

  • 4 × silicone couplers

  • PCV hose

  • Required clamps and installation hardware

Road Approval in Germany

This intake system is not approved for use on public roads under German StVZO regulations.

The product is supplied without a German TÜV certificate, ABE or other documentation for road approval.

Any US emissions approval, including CARB certification, does not constitute road approval in Germany.

Please consider the legal requirements applicable in your country before ordering or installing this product.

Frequently Asked Questions

What is the difference between the STILLEN Gen 3 and a short ram intake?

A short ram intake typically draws air from inside the engine compartment. The STILLEN Gen 3 positions both filters in front of the radiator to access incoming air from outside the engine bay.

How much power does the STILLEN Gen 3 intake add?

STILLEN reports gains of up to 17.5 horsepower at the wheels and 13 lb-ft of wheel torque on a Nissan 370Z with the factory ECU calibration. Individual results may vary.

Does the intake require ECU tuning?

According to STILLEN, the system can operate with the factory ECU calibration. However, individual ECU tuning may be beneficial when combined with additional engine modifications.

Do I need to remove the front bumper for installation?

STILLEN recommends removing the front bumper to make installation easier and provide access to the radiator support.

Is cutting or drilling required?

The openings in the front radiator support must be slightly enlarged to accommodate the intake pipes.

Does the system fit the Nissan 370Z Nismo?

STILLEN lists compatibility with Nismo models, although additional modifications may be required. Fitment should be confirmed before installation.

Are the air filters reusable?

Yes. The supplied oiled performance filters can be cleaned and maintained according to the manufacturer's instructions.

Is the STILLEN Gen 3 intake road legal in Germany?

No. The system is supplied without German road approval documentation and is not approved for public road use under the StVZO.

Can CTD Germany install and tune the intake?

Yes. We offer professional installation and individual ECU calibration at our workshop in Wesel, Germany.

Related Products and Services

  • EcuTek ECU tuning for Nissan 370Z

  • Performance exhaust systems

  • High-flow catalytic converters

  • CTD Oil Cooler Kit Pro V2

  • Dynojet AWD chassis dynamometer testing

  • Professional installation at CTD Germany

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Angaben zur Produktsicherheit gem. Verordnung (EU) 2023/988

Hersteller:
STILLEN
3176 Airway Ave.
Costa Mesa, CA 92626
USA
Tel.: +1 866-250-5542
E-Mail: sales@stillen.com
Verantwortliche Person:
CTD Germany e.K.
Weseler Str. 97
46487 Wesel
Germany
E-Mail: info@ctd-germany.com